CHECK OUR
PEDALBOXES
AR-PB-P001
![AR-PB-P001_pic1](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P001_pic1.png)
![AR-PB-P001_pic2](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P001_pic2.png)
![AR-PB-P001_pic3](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P001_pic3.png)
![AR-PB-P001_pic4](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P001_pic4.png)
![AR-PB-P001_pic5](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P001_pic5.png)
![AR-PB-P001_pic6](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P001_pic6.png)
- Universal floor-mounted pedalbox, with 2 pedals – throttle and brake.
- Stiff, welded steel base construction, rust protected by black oxide and machined aluminum axis mechanism.
- All axes constructed from ball bearings for minimum friction.
- Weight: 3,8kg – 4,4kg
- Throttle mechanism allows for wide range of operation selection: cable directed front, rear or on the side of pedal, rotary sensor (single or double, also may be used together with cable) and linear potentiometer.
- Adjustable cable stroke and min/max throttle pedal positions.
- Base of pedalbox allows for cable attachment.
- Throttle mechanism fits equipment: rotary sensors Variohm Euro XPD 2832 or Penny & Giles TPS280DP or Kasensors KH31/32 or equivalent, linear potentiometers Variohm VLP/VXP 50 or Bosch LP50 or equivalent, cable ended by ⌀5mm ball joint DIN 71802 or equivalent, cable braid ended by threaded part M6.
- Brake mechanism fits master cylinders Wilwood 260-2636 or equivalent and typical balance bar with ⌀26mm spherical bearing outer diameter (both not included in the set).
- Possibility of additional brake reverse spring attachment to brake pedal.
- All fasteners necessary to attach equipment are included in the set. Set content and delivery state is showed on the picture.
- Fits footrests AR-PB-PDN001 (sold separately), to adjust pedals position up-down and left-right.
- See attached Product Drawing and User Manual, to do assembly and adjustability process easier and faster.
AR-PB-P002
![AR-PB-P002_pic1](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P002_pic1-qk548afub8gq1xe2fob4i0v3fidwhkjw0ml4a1p02o.png)
![AR-PB-P002_pic2](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P002_pic2-qk548g2vg8ofzl5viqqvwzfuztm3rr6a1ei15pgn1c.png)
![AR-PB-P002_pic3](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P002_pic3-qk548sarx3566io4je11becuptxvjtisf2zceayisg.png)
![AR-PB-P002_pic4](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P002_pic4-qk548yvn8xe6fsekgyvfaup2vj1g1p8wrzjqr8orkw.png)
![AR-PB-P002_pic5](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P002_pic5-qk5496ecrloh0o3n924fussrmm0dra2rh0rmlgdm74.png)
![AR-PB-P002_pic6](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P002_pic6-qk549hof1m3wvzn9f6zyopyar8gsbnbjiklgcrww4g.png)
- Universal floor-mounted pedalbox, with 3 pedals – throttle, brake and mechanical/electrical clutch.
- Stiff, welded steel base construction, rust protected by black oxide and machined aluminum axis mechanism.
- All axes constructed from ball bearings for minimum friction.
- Weight: 5,3kg – 6,5kg
- Throttle and clutch mechanisms allow for wide range of operation selection: cables directed front, rear or on the side of pedal, rotary sensor (also may be used together with cable) and linear potentiometers.
- Adjustable cables stroke and min/max throttle/clutch pedals positions.
- Base of pedalbox allows for cables attachment.
- Throttle and clutch mechanisms fit equipment: rotary sensors Variohm Euro XPD 2832 or Penny & Giles TPS280DP or Kasensors KH31/32 or equivalent, linear potentiometers Variohm VLP/VXP 50 or Bosch LP50 or equivalent, cable ended by ⌀5mm ball joint DIN 71802 or equivalent, cable braid ended by threaded part M6.
- Brake mechanism fits master cylinders Wilwood 260-2636 or equivalent and typical balance bar with ⌀26mm spherical bearing outer diameter (both not included in the set).
- Possibility of additional brake reverse spring attachment to brake pedal.
- All fasteners necessary to attach equipment are included in the set. Set content and delivery state is showed on the picture.
- Fits footrests AR-PB-PDN001 (sold separately), to adjust pedals position up-down and left-right.
- See attached Product Drawing and User Manual, to do assembly and adjustability process easier and faster.
AR-PB-P003
![AR-PB-P003_pic1](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P003_pic1-qk54b7prkogu6955cxtc9aapynz0fo5tr3ni11cwps.png)
![AR-PB-P003_pic2](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P003_pic2-qk54bf8h3cr4r4u8512ct8eepqxy58zog4vdv91rc0.png)
![AR-PB-P003_pic3](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P003_pic3-qk54bltcf7050eko2lwqsoqmvg1in4pst1fs86s04g.png)
![AR-PB-P003_pic4](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P003_pic4-qk54btc1xvafla9qup5rcmubmj0gcpjni2no2eguqo.png)
![AR-PB-P003_pic5](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P003_pic5-qk54c0urgjkq65ytmserwky0dlze2adi73vjwm5pcw.png)
![AR-PB-P003_pic6](https://asama-racing.com/wp-content/uploads/elementor/thumbs/AR-PB-P003_pic6-qk54c9bb61wb2nmj9e2f10t5q2tozkb389qx83t5sw.png)
- Universal floor-mounted pedalbox, with 3 pedals – throttle, brake and hydraulic clutch.
- Stiff, welded steel base construction, rust protected by black oxide and machined aluminum axis mechanism.
- All axes constructed from ball bearings for minimum friction.
- Weight: 5,2kg – 5,8kg
- Throttle mechanism allows for wide range of operation selection: cable directed front, rear or on the side of pedal, rotary sensor (also may be used together with cable) and linear potentiometer.
- Adjustable cable stroke and min/max throttle pedal positions.
- Base of pedalbox allows for cable attachment.
- Throttle mechanism fits equipment: rotary sensors Variohm Euro XPD 2832 or Penny & Giles TPS280DP or Kasensors KH31/32 or equivalent, linear potentiometers Variohm VLP/VXP 50 or Bosch LP50 or equivalent, cable ended by ⌀5mm ball joint DIN 71802 or equivalent, cable braid ended by threaded part M6.
- Brake mechanism fits master cylinders Wilwood 260-2636 or equivalent and typical balance bar with ⌀26mm spherical bearing outer diameter (both not included in the set).
- Possibility of additional brake reverse spring attachment to brake and clutch pedals.
- Clutch mechanism fits master cylinder Wilwood 260-2636 or equivalent and rod end 5/16″UNF female (both not included in the set).
- All fasteners necessary to attach equipment are included in the set. Set content and delivery state is showed on the picture.
- Fits footrests AR-PB-PDN001 (sold separately), to adjust pedals position up-down and left-right.
- See attached Product Drawing and User Manual, to do assembly and adjustability process easier and faster.
AR-PB-P006
![AR-PB-P006_pic1](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P006_pic1.png)
![AR-PB-P006_pic2](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P006_pic2.png)
![AR-PB-P006_pic3](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P006_pic3.png)
![AR-PB-P006_pic4](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P006_pic4.png)
![AR-PB-P006_pic5](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P006_pic5.png)
![AR-PB-P006_pic6](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P006_pic6.png)
- Universal floor-mounted pedalbox, with 2 pedals – throttle and brake.
- Stiff, welded steel base construction, rust protected by black oxide and machined aluminum axis mechanism.
- All axes constructed from ball bearings for minimum friction.
- Weight: 3,9kg – 4,5kg
- Throttle mechanism allows for wide range of operation selection: cable directed front, rear or on the side of pedal, rotary sensor (single or double, also may be used together with cable) and linear potentiometer.
- Adjustable cable stroke and min/max throttle pedal positions.
- Base of pedalbox allows for cable attachment.
- Throttle mechanism fits equipment: rotary sensors Variohm Euro XPD 2832 or Penny & Giles TPS280DP or Kasensors KH31/32 or equivalent, linear potentiometers Variohm VLP/VXP 50 or Bosch LP50 or equivalent, cable ended by ⌀5mm ball joint DIN 71802 or equivalent, cable braid ended by threaded part M6.
- Brake mechanism fits master cylinders AP Racing CP7855 or equivalent and typical balance bar with ⌀26mm spherical bearing outer diameter (both not included in the set).
- Possibility of additional brake reverse spring attachment to brake pedal.
- All fasteners necessary to attach equipment are included in the set. Set content and delivery state is showed on the picture.
- Fits footrests AR-PB-PDN001 (sold separately), to adjust pedals position up-down and left-right.
- See attached Product Drawing and User Manual, to do assembly and adjustability process easier and faster.
AR-PB-P007
![AR-PB-P007_pic1](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P007_pic1.png)
![AR-PB-P007_pic2](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P007_pic2.png)
![AR-PB-P007_pic3](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P007_pic3.png)
![AR-PB-P007_pic4](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P007_pic4.png)
![AR-PB-P007_pic5](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P007_pic5.png)
![AR-PB-P007_pic6](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P007_pic6.png)
- Universal floor-mounted pedalbox, with 3 pedals – throttle, brake and mechanical/electrical clutch.
- Stiff, welded steel base construction, rust protected by black oxide and machined aluminum axis mechanism.
- All axes constructed from ball bearings for minimum friction.
- Weight: 5,7kg – 6,9kg
- Throttle and clutch mechanisms allow for wide range of operation selection: cables directed front, rear or on the side of pedal, rotary sensor (also may be used together with cable) and linear potentiometers.
- Adjustable cables stroke and min/max throttle/clutch pedals positions.
- Base of pedalbox allows for cables attachment.
- Throttle and clutch mechanisms fit equipment: rotary sensors Variohm Euro XPD 2832 or Penny & Giles TPS280DP or Kasensors KH31/32 or equivalent, linear potentiometers Variohm VLP/VXP 50 or Bosch LP50 or equivalent, cable ended by ⌀5mm ball joint DIN 71802 or equivalent, cable braid ended by threaded part M6.
- Brake mechanism fits master cylinders AP Racing CP7855 or equivalent and typical balance bar with ⌀26mm spherical bearing outer diameter (both not included in the set).
- Possibility of additional brake reverse spring attachment to brake pedal.
- All fasteners necessary to attach equipment are included in the set. Set content and delivery state is showed on the picture.
- Fits footrests AR-PB-PDN001 (sold separately), to adjust pedals position up-down and left-right.
- See attached Product Drawing and User Manual, to do assembly and adjustability process easier and faster.
AR-PB-P008
![AR-PB-P008_pic1](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P008_pic1.png)
![AR-PB-P008_pic2](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P008_pic2.png)
![AR-PB-P008_pic3](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P008_pic3.png)
![AR-PB-P008_pic4](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P008_pic4.png)
![AR-PB-P008_pic5](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P008_pic5.png)
![AR-PB-P008_pic6](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-P008_pic6.png)
- Universal floor-mounted pedalbox, with 3 pedals – throttle, brake and hydraulic clutch.
- Stiff, welded steel base construction, rust protected by black oxide and machined aluminum axis mechanism.
- All axes constructed from ball bearings for minimum friction.
- Weight: 5,4kg – 6kg
- Throttle mechanism allows for wide range of operation selection: cable directed front, rear or on the side of pedal, rotary sensor (also may be used together with cable) and linear potentiometer.
- Adjustable cable stroke and min/max throttle pedal positions.
- Base of pedalbox allows for cable attachment.
- Throttle mechanism fits equipment: rotary sensors Variohm Euro XPD 2832 or Penny & Giles TPS280DP or Kasensors KH31/32 or equivalent, linear potentiometers Variohm VLP/VXP 50 or Bosch LP50 or equivalent, cable ended by ⌀5mm ball joint DIN 71802 or equivalent, cable braid ended by threaded part M6.
- Brake mechanism fits master cylinders AP Racing CP7855 or equivalent and typical balance bar with ⌀26mm spherical bearing outer diameter (both not included in the set).
- Possibility of additional brake reverse spring attachment to brake and clutch pedals.
- Clutch mechanism fits master cylinder AP Racing CP7855 or equivalent and rod end 5/16″UNF female (both not included in the set).
- All fasteners necessary to attach equipment are included in the set. Set content and delivery state is showed on the picture.
- Fits footrests AR-PB-PDN001 (sold separately), to adjust pedals position up-down and left-right.
- See attached Product Drawing and User Manual, to do assembly and adjustability process easier and faster.
AR-PB-PDN001
![AR-PB-PDN001_pic1](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-PDN001_pic1.png)
![AR-PB-PDN001_pic2](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-PDN001_pic2-1.png)
![AR-PB-PDN001_pic2](https://asama-racing.com/wp-content/uploads/2024/02/AR-PB-PDN001_pic2.png)
- Universal footrest that fits all Asama Racing pedalboxes.
- Allows to adjust pedals position up-down and left-right.
- Machined from durable AW-2017A aluminum.
- Weight (without fasteners): 140g
- Set contains 1 footrest, 2 bolts and 2 nuts.